6G Celicas Forums

Welcome Guest ( Log In | Register )

> cv joint boot installation, please help i need to drive 2morrow
post Feb 13, 2005 - 5:24 PM
+Quote Post
chicklover345

Enthusiast
*
Joined Jul 16, '03
From Boise, Idaho
Currently Offline

Reputation: 0 (0%)




I have gootten the brake caliper off and disconnected it from the shock what else needs to be done in order to take the brake disk off the cv joint so i can put the boot on the joint. any help appreciated thanks

This post has been edited by chicklover345: Feb 13, 2005 - 10:34 PM


--------------------
My car = 0-60 in ~9sec
It's slow, I know
 
Start new topic
Replies
post Feb 13, 2005 - 8:00 PM
+Quote Post
Hanyo

Enthusiast
*****
Joined Aug 16, '03
From Bay area
Currently Offline

Reputation: 0 (0%)




your doing it the hard way..

The way i did it was.. Loosed that big bolt in the center of the hub. Then hit the axle with a hammer to it loosens the axle from the hub. I then unbolted the 3 bolts at the bottom of the wheel hub.. Then popped the whole brakes and hub assemble away from the lower arm of the suspension.. Then you have room to drop part of the axle down. And use a crow bar to pry the axle from the transmission.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: August 1st, 2025 - 12:52 PM