![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 3, '05 From USA/Virginia Currently Offline Reputation: 2 (100%) ![]() |
Hi,
I just bought a 99 celica gt liftback. I'm looking to do some interior modifications to make the car my own. My first project is to replace all the lights in the guages with blue LEDs. I bought some of these http://autolumination.com/194.htm (Opaque Focused Lenses) and was planning on following Coomer's howto. but i don't have a shop manual and really don't want to break anything (new car syndrome maybe). don't have very much experience working on cars. but i've built my last 3 computers and soldered blue leds into all the consumer electronics i own. and this looks to be a solderless operation. anyways, what do you guys think i should do? jump right in with the howto and the leds? buy the $185 worth of toyota shop manuals (or maybe just the $50 electrical manual)? buy a 3rd party shop manual (which would you recomend?)? eventually i want to do the climate constrol and the clock, and all the other lights too. just would like some advice (won't get pissed at any advisor if i break something) thanks Ny |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 3, '05 From USA/Virginia Currently Offline Reputation: 2 (100%) ![]() |
thanks for the encouragement and pictures Forkee.
and thanks for the tip Coomer. i really like leds, so i'll see what i end up with. i was hoping the opaque leds would disperse light a little more evenly than the clear ones. and if not good enough, i was going to try those 5 led matrix bulbs, or the wide angle lenses (thinking now that these would've been a better bet) from the same page. if i get something that looks good i'll borrow/buy a camera and take some pics. This post has been edited by Zimluura: Feb 16, 2005 - 1:19 AM |
![]() ![]() |
Lo-Fi Version | Time is now: September 23rd, 2025 - 3:06 PM |