which manifold did you use? 5sfte ppl, 3sgte mani/dp on a 5sfe Options

[urbandork]

What manifold and down pipe would be better to use a 3sgte from a celica or an mr2? i would assume a celica.

But seeing as ill have to run custom exhaust can i just run it off of an mr2 and not worry about the way the down pipe points at its end.

i want to use this
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=33742

but its probably for an mr2 even tho it says celica.

ive been thinking about finding a manifold and down pipe that came from a 3sgte that was in a celica but i havnt seen many of those out there. This is why ive been looking at mr2 stuff.

Are the manifold and DP from a celica all track the same as the mr2? i doubt it.

thanks in advanced

[urbandork]

Well i gave that tubular set up thinking few days ago and figured for the cost (even if it was lower then normal) i wouldnt really need it for the power id be running. So i decided to go with the stock mani and stock down pipe.

As such just as long as the turbo matches up with the manifold (twinentry and single entry) then a stock 3sgte manifold no mater the gen should go on to my 5sfe right?

or is there more to the story?