Feb 24, 2005 - 11:57 PM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) |
What are the mechanics behind contorling the level of boost? im a little confused as to how i would contorl it using a ct26 turbo. What do i need and how does it all work?
Also whats the waste gate for? |
![]() |
Feb 25, 2005 - 3:02 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) |
r you saying that if im fine with running 8 psi then i dont need a blow off valve on my intercooler pipping? I always thought the bov was used to vent presureized air when the tb was closed. Is this now vented through the waste gate? no right? i still need a bov no mater the psi i plan on running.
if i want to run lower then stock boost the bov as well as the waste gate would vent excess pressure? What if i want to run higher boost? lol still learning and trying to get the jist of things can you tell? thanks in advanced This post has been edited by urbandork: Feb 25, 2005 - 3:30 AM |
urbandork boost conrol Feb 24, 2005 - 11:57 PM
rjbibeau the wastegate controls the boost setting. people u... Feb 25, 2005 - 12:49 AM
urbandork So how do i adjust the boost level? do i adjust th... Feb 25, 2005 - 12:56 AM
rjbibeau the wategate is set at a factory setting the ct-26... Feb 25, 2005 - 1:17 AM
urbandork how do i run higher boost? do i have to change the... Feb 25, 2005 - 1:45 PM
Newbie Basically what happens is that you have the wasteg... Feb 26, 2005 - 1:01 AM
urbandork no i got the jist of it. Feb 26, 2005 - 1:09 AM
mark_426 An external wastegate is used with larger turbocha... Feb 26, 2005 - 7:32 AM
Newbie I think mass boosting will blow the engine before ... Feb 26, 2005 - 11:56 AM
urbandork Just to make sure not matter what set up i have im... Feb 26, 2005 - 1:22 PM
Hanyo how does the Apexi Boost Controller work? Feb 26, 2005 - 4:26 PM
Fox-N-It2 The wastegate controls the exhast thus controling ... Feb 26, 2005 - 4:45 PM
urbandork QUOTE(Fox-N-It2 @ Feb 26, 2005 - 9:... Feb 26, 2005 - 11:31 PM
mark_426 hanyo - I believe it is essentially a solenoid - a... Feb 26, 2005 - 5:57 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 16th, 2026 - 9:51 AM |