Side vent project. Can someone photoshop Options

[madmods]

I don't really want to hack into my car if this is not going to look good. And i really don't know exactly where its going, until I pull out my seats and panels to make sure its not in the way of anything. The verts have an extra brace, and its impossible to get to the outer fender, so it will require cutting out the inner brace, glassing the vent, then welding the brace in. I don't want to that, unless this vent looks good. If someone could photoshop this for me, it would be appreciated, and I'll write a how to with pics.

[madmods]

lil bit lower like that

but be really carefull if you do this
cause if you don't get it right
like perfect it will ruin every thing
or look really really good
[right][snapback]252645[/snapback][/right]

Agreed, this is one of those jobs, if it goes wrong, your screwed, ao ill save the sheetmetal in case I got to weld it back and put back together

Definitely nice.  I'd do it.

When you planning to put those in?
[right][snapback]252677[/snapback][/right]

Hopefully this month, but not in time for the meet.

IMO that last one i had was better cause it looks like a functional vent
and not venting into the top too high makes it look like its fake and not a really functional vent

it should be as low as mine
but then cut the angel of the skirt to match the scoop
[right][snapback]252693[/snapback][/right]

I cut the skirt to match the indentation of the door. it would have to be right on top of the skirt.