6G Celicas Forums

Welcome Guest ( Log In | Register )

> Sub Giving Feedback, Not sure what to check next. . .
post Mar 6, 2005 - 2:36 PM
+Quote Post
My94RedCelica

Enthusiast
**
Joined Jul 25, '04
From Lima, Ohio
Currently Offline

Reputation: 0 (0%)




Quick question for you all. I tried a search but didn't find what I need. I have a Kenwood in dash DVD player connected to a Kicker CVR 12" The set up and wiring was working completely fine, but after a week I started getting horrible feedback from the sub. My friend had installed the headunit, so I went back and traced the wires. He had the RCA, remote, and power wires running together. So I seaperated the RCA's from the remote wire and I still have feedback. I checked the amp ground. moved it around a little. Now I have a humming feedback, and it gets higer pitched when I hit the gas. i'm not quite sure what to check from here, so any advice would be appreciated!
 
Start new topic
Replies
post Mar 6, 2005 - 11:01 PM
+Quote Post
Digndoug



Enthusiast
*****
Joined Aug 20, '03
From Annapolis, Md
Currently Offline

Reputation: 5 (100%)




QUOTE(TRD6GC @ Mar 6, 2005 - 9:48 PM)
Ok, first your wires are run wrong. The POWER and RCA CANNOT be ran on the same side of the car. You have to separate those two and makes sure they never cross, and i would run the remote wire with the power not RCA's, but i do not believe it will make a difference. Also, I do not know exactly where the fuel pump on our cars are, but if you run wires over that if will give you feedback as well. If that does not work than your blew a circuit in your deck. If problem persists repost and i'll tell you what to do to check your deck's circuits. Hope this works
[right][snapback]253909[/snapback][/right]


Dude thats all BS. you dont have to seprate, it dosnt make a fly bit of a dif. People say you do, i have done and i havnt, my car right now are both togeather one on top of the other and go right on top of the fuel pump and they work perfect.

Please do not give any false indo.Scarlle is most likly right. You could also try a ground fault interupter. I had to use one in my old dodge cause i couldnt find out what was causeing feedback and it worked perfect.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 20th, 2025 - 5:59 PM