![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() Joined Jul 25, '04 From Lima, Ohio Currently Offline Reputation: 0 (0%) ![]() |
Quick question for you all. I tried a search but didn't find what I need. I have a Kenwood in dash DVD player connected to a Kicker CVR 12" The set up and wiring was working completely fine, but after a week I started getting horrible feedback from the sub. My friend had installed the headunit, so I went back and traced the wires. He had the RCA, remote, and power wires running together. So I seaperated the RCA's from the remote wire and I still have feedback. I checked the amp ground. moved it around a little. Now I have a humming feedback, and it gets higer pitched when I hit the gas. i'm not quite sure what to check from here, so any advice would be appreciated!
|
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%) ![]() |
You guys never mentioned the fact that if you're power amp cable is running by electronics in the engine bay, you may here a lot of commotion from that. (example, running your power wire on the celi from the battery right across the spark plug wires or distributer cap)
-------------------- ![]() The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 5:54 PM |