6G Celicas Forums

Welcome Guest ( Log In | Register )

> Changing timing on a 96+ celica ST, finally did the mod
post Apr 10, 2003 - 5:34 PM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




Well i know that guys like Charlie wanted to know about this. here is the background info

on the 94-95 ST's the timing can be adjusted by loosening the bolt on the distributor and twisting it.

on the 96+ celica ST's with PIA obd2, the distributor is locked. the mounting hole in the distributor bracket is only big enough for the bolt that locks it,

what i did to fix this(since adjusting the timing is very important when you go turbo) is i took of the distributor and then took the mounting bracket off of that.

with that done i put the bracket in a vice and using a drill bit that was slightly bigger than the bolt, i elongated the hole to where there was about 1/4 inch of metal left on each side(to retain some strength) and then i put it all back on.

now i can adjust the timing on my car several degrees in each direction.

i will try to get some pics but i dont have a digi cam and im not patient enough to put mods on hold until i can borrow someones camera.


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram
 
Start new topic
Replies
post Apr 10, 2003 - 6:53 PM
+Quote Post
west_minist



Enthusiast
***
Joined Oct 27, '02
From Barbados
Currently Offline

Reputation: 0 (0%)




That is the best thing.

Get an ignition unit w/ timing module.

Well for college students, I guess the distr. is the only solution.


--------------------
West_Minist

Hydra EMS Dealer & Tuner
Subaru ECUFlash Tuner
http://www.socob.bb
http://xtremeracingtuning.com

Viciously Tuned, Driven Hard


Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 20th, 2025 - 5:07 PM