Custom Shift Cover/Boot Options

[wuhukf]

I made a custom shift cover/boot to go with the 7gc short shifter I put in. I like seeing the shifter so I tried to cover as little of it as possible. I like it so far, tell me what you guys think.

[Digndoug]

nice job customizing that. its not really my style but well done nonetheless. also could you elaborate on the plastic part pushing up on the shifter cable? I didn't even notice it when I put in my shortshifter; does it make a huge difference?
[right][snapback]258472[/snapback][/right]

Yes that was the same thing I figure out awhile ago about the "lancer short shifter" I put in. Those two plastic peaces after the clip hold the linkage stright, which then cause the metal/cable to bend when going into 2nd 4th an R. You need to cut both strings of plastic going underneth the cable so it flexs down a lil after the clip.

If you go with the 7th gen, it comes with everything, and requires no grinding. but is $10 more an dosnt come with a ****erball

If you go with the lancer/evo, you need to goto the hardware store and get bolts an spacers, and grind down the two balls a lil to fit. but its $10 cheaper and comes with an I think awsome chrome ball handle.