Mar 16, 2005 - 2:17 PM
|
|
|
Enthusiast ![]() ![]() ![]() Joined Nov 12, '02 From Columbus, Ohio Currently Offline Reputation: 15 (100%) |
My celi has been down for a few months b/c I live in an apartment and can't fix the problem. It started when I was driving along and felt some play in the clutch pedal before feeling any pressure. Over 3 days it got worse, and eventually to the point where I couldn't shift gears. Knowing this I brought the car to my friend's house. I started it in 2nd gear and drove there. I came to a red light, so I'm at astop in 2nd gear, with the clutch pedal pushed down. The damn clutch started to engage and the car nearly stalled. Now, when I start the car in gear with the clutch pedal down, I have to come off of the clutch, fading it to start it, which means that it's not disengaging when pressing the pedal. I thought it might be the clutch master cylinder, pressure plate, or I guess slave cylinder. I just removed my clutch cyl and I don't see any destroyed boots. I also have an mr2 tranny sitting here, but putting it on is gonna suck. Any thing else it could be, or what do you guys think?
|
![]() |
Mar 22, 2005 - 11:05 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%) |
It's either you slave cylinder is bad or a leak or your master cylinder is bad. It shouldnt have anything to do with your tranny.
|
celica3sgte Drivetrain help Mar 16, 2005 - 2:17 PM
celica3sgte bump Mar 21, 2005 - 7:18 PM
lagos sounds like the same problem my friend had in his ... Mar 21, 2005 - 7:30 PM
celica3sgte I used a TRD pressure plate(prolly the stock one f... Mar 22, 2005 - 10:43 PM
gnetik Rjb23 is right. I had the same problem and I thoug... Mar 23, 2005 - 12:12 AM
celica3sgte Awesome. I have to pick up the master cyl tomorro... Mar 23, 2005 - 10:36 PM
macavely i haven't read the other post just the first o... Mar 24, 2005 - 2:43 AM
celica3sgte I just installed the new master cylinder and there... Mar 24, 2005 - 5:22 PM
Rjb23 Have you tried bleeding your system after you inst... Mar 24, 2005 - 8:36 PM
Supersprynt Maybe try adjusting the pedal? Mar 24, 2005 - 8:44 PM
celica3sgte I had to bleed it completely b/c there was no flui... Mar 24, 2005 - 9:30 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 21st, 2025 - 2:13 PM |