Ferrari style shifter plate Options

[blu94gt]

Hey, I was curious if anyone had suggestions on making a plate like this:




I figured just take the boot off and measure all the clearances, draw it on some paper or cardboard then cut it out and lay it over the shifter to make sure the clearances are right before milling it in my college's shop. Any recommendations on shifter levers and knobs, or other general comments/suggestions?

~Brian

[Digndoug]

Absolutely! I was going to make a cardboad pattern and pass the ideal to Doggy to see if he would manufacture it. the lambos have a nice one too. I have even seen fake ones for automatics.
[right][snapback]261508[/snapback][/right]

Why not try yourself.. any thing doggy can do, you can do too.. just practice..

I have tried.. but it seemed that the gear shifting was to close, and all you come out with is a lil box..

This post has been edited by Digndoug: Mar 23, 2005 - 11:01 PM

[madmods]

Absolutely! I was going to make a cardboad pattern and pass the ideal to Doggy to see if he would manufacture it. the lambos have a nice one too. I have even seen fake ones for automatics.
[right][snapback]261508[/snapback][/right]

Why not try yourself.. any thing doggy can do, you can do too.. just practice..

I have tried.. but it seemed that the gear shifting was to close, and all you come out with is a lil box..
[right][snapback]261522[/snapback][/right]

Well Doug,
You know i do all my custom work myself, Doggy is the manufacturer for stuff on this site, and hes starting his company. I personally dont have time to make parts for people, and believe me I get asked all the time.