![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
Thanks to Doug and rjb23 for experimenting with other short shifters (Doug-EVO and rjb23-7th gen). I recieved mine (7th gen about $45 on ebay) and installed. It took about 1.5 hours from start to finish. I downloaded the instructions from TWMs website and read the ones in the how to articles.
I have to say the throw is much much shorter and about 1-2 inches lower than stock. My finger are kinda close to the dash but I think it is because I only used 2 of the 4 spacers (the back 2) plus I have big hands. I will put some pics up when I put the other 2 spacers in. Bottom line, this this rocks - great mod for $45. This post has been edited by Batman722: Mar 29, 2005 - 12:24 AM -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
OK just to be safe I cut mine and didn't feel a difference. It still feels smooth.
Doug and rjb23, did you take out the stock rubber spacers on the assembly ? I did when I put the new spacers on. That might be the problem... This post has been edited by Batman722: Mar 30, 2005 - 12:39 AM -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: June 11th, 2025 - 6:34 AM |