7AFTE, List of parts and prices Options

[celicaboy04]

Hey guys, I have been comprising a list of necessary parts and estimates on the prices for a turbo set up. I was interested in Niks but it has sold already.

Please only post if you know what youre talking about turbo wise - for those of you who have done the setup like Nik - please tell me if there is anything I am missing.

PS
If I have a question mark, it means I dont know what it is/or where to get it.

7AFE Turbo Set Up

T3 turbo $500-$900
Custom down pipe ?
Jgs tools manifold $265
Turboxs MBC $50-$80
Short ram intake and filter Have
Vortech 12:1 FMU with fuel lines $40
Walbro 255lph supra fuel pump $100
Jgs tools oil feed line kit $55
Jgs oil return/drain line $40
Pre tapped and fitted oil pan ?
GReddy universal IC piping kit $250
FMIC $200
GReddy BOV $200
Air lines ?
Check valves for the MAP ?
SAFC2 or PROFEC E-01 $240 or $650

Triple gauge pod
Oil Pressure Gauge
Boost Gauge
Voltmeter Gauge

I dont know what Check Valves are for the MAP (as you can tell I am not a mechanic at ALL, which is why I am getting help for the necessary parts), for airlines what size and how much will I need, oil pan I just tap myself right?

[CelicaST18]

Many of the parts can be purchased from Ebay brand new...I am currently colecting parts for my 7AFTE... I am using a CT26 turbo off of a MKIII supra...They ran at 7.5 psi from the factory, so no need for a MBC... I am using the intercooler off of the same supra.. from ebay I bought an OBX racing 12:1 fmu ($90), a walbro 255lph fuel pump ($92), and a Blitz DATT turbo timer/ boost guage ($120) all brand new in boxes with instructions. My suggestion is shop around find the best price..I will be getting a BOV from Ebay (this I may get used because I want a Blitz) I also suggest learning to weld, or finding a friend who can... Exhaust shops wi charge you an arm and a leg for relatively easy fork. I will be making the IC piping (2 in.) a downpipe, and a 3 in.turbo back exhaust for next to nothing...You WILL save a bundle if you can get a hook-up on fabrication of the plumbing...Good luck with the 7AFTE

[nik]

Many of the parts can be purchased from Ebay brand new...I am currently colecting parts for my 7AFTE... I am using a CT26 turbo off of a MKIII supra...They ran at 7.5 psi from the factory, so no need for a MBC... I am using the intercooler off of the same supra.. from ebay I bought an OBX racing 12:1 fmu ($90), a walbro 255lph fuel pump ($92), and a Blitz DATT turbo timer/ boost guage ($120) all brand new in boxes with instructions. My suggestion is shop around find the best price..I will be getting a BOV from Ebay (this I may get used because I want a Blitz) I also suggest learning to weld, or finding a friend who can... Exhaust shops wi charge you an arm and a leg for relatively easy fork. I will be making the IC piping (2 in.) a downpipe, and a 3 in.turbo back exhaust for next to nothing...You WILL save a bundle if you can get a hook-up on fabrication of the plumbing...Good luck with the 7AFTE
[right][snapback]272176[/snapback][/right]

i would not suggest running off your wastegate also is the ct-26 a twin entery or single you might have some long or spool wont start until 3500rpm or later
just my .02 cents