![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() Joined Mar 28, '03 Currently Offline Reputation: 0 (0%) ![]() |
What do you need to modify to shoot nitrious in your car? I have an ST so do I need to do anything to it before I buy a bottle and hook things up? And exactly when do you use nitrious, what RPM's? I might wanna try it out!
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 11, '03 From Phila, PA Currently Offline Reputation: 0 (0%) ![]() |
I think the easiest nitrous upgrades you can do is the Zex dry nitrous system. You can buy a Zex cone filter to put on an intake and it has a place to put the nitrous injecter so you dont have to drill a hole in your intake tube. It injects the nitrous into the intake so you don't need to do half as much installation with selenoids etc... Just install the nozzle with or without the Zex air filter (it just makes it easier with that) install the bottle, install the computer unit, run some wires and install arming switch. The nitrous is administered when the system is armed and your at wide open throttle so you can screw up the timing you should shoot.
takes like 3 hours sor so, and cost a lil over $500, up to 75 shot depending on injector but if you run that much you should retard your timing This post has been edited by Milds3vn: Apr 16, 2003 - 10:43 PM |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 3:18 AM |