FG box in back pannels, Pix. 56k beware Options

[urbandork]

I did all of the fiberglassing myself so im a bit proud as it was my first time fiber glassing anyting. I started in morning and finished in the early evening. Here are some of the pix i took through out project. Some are of the left and some are of the right.

I was able to lay down two and in some places three layers down. I used both weaved cloth as well as a thicker weaved mat. I also did some touch up work the today but dont have pix of that.












This post has been edited by urbandork: Dec 16, 2004 - 2:42 AM

[king_wsk]

Doesn't look like there is enough volume for the subs. usually sealed

can't wait to finish the bandpass box and install this lovely equipment:



Amp - Legacy LA3090 - 2400watt RMS 1ohm

dual 12" cold cathode sound activated PC case lights (12v)

Capacitor - 5 Farad 20volt w/ blue neon lights

Driver - Audiobahn AW1508T - 15" 2000watt RMS 2 ohm dual voice (1ohm wiring)

Wiring - 2G kit with 80amp fuse, double run of 10 guage for the sub

Box- (not yet built) bandpass with plexiglass window.


*yeah i know, its hella overkill, but thats just how I like it.