C02 intake systems, cryogenic Options

[TrdKing]

I was looking at the cryogenic intake systems and I was just looking to make my own system. After looking around and thinking for a while I came up with the idea.
I bought a small 70cubic inch carbon fiber compressed air tanks that was converted to hold CO2 from a paintball shop. I am going to mount it somewhere and run lines to either a regulator or a solenoid and then spray at motor. I was thinking initially about spraying it in the intake but after some thought I new it would just choke the motor. So I am going to spray some at the fuel rail and then some at the top 3 inches of the intake tube on my Injen intake. I am just posting to give the rest of you some ideas and ill keep you posted on how well it goes. Even if it is not huge it will still keep the intake cold at the track and will look cool when working.

[TrdKing]

I looked into buying some pieces today and it would cost too much for what I was looking for. I would rather buy some mods that have "real" results. Ive decided against building it but it is somewhat of a good idea on paper. You would just have to contain it in an area like the real kits.

*I wasnt thinking of spraying into the motor as I know that wont do any good at all*