May 5, 2005 - 2:57 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I was wondering if any of you who put in a push button starter used a relay or not. I know that with an actual S2000 button a relay is pretty much needed, but how about a button from Ignited ? one of these pictured
![]() relay or not ? -------------------- |
![]() |
May 8, 2005 - 12:57 AM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
if you don't have the clutch in and try to start it, it will thrust forward like any car will. On an auto there is no problem. The button just replaces the last turn of the key basicly
-------------------- |
Batman722 for those with a push button start May 5, 2005 - 2:57 AM
Hanyo it depends on the switch.. we would need some spec... May 5, 2005 - 4:47 AM
Scott How much do push button starters cost (purchase + ... May 8, 2005 - 12:21 AM
Batman722 I installed mine myself, took about an hour. I got... May 8, 2005 - 12:24 AM
Scott QUOTE(Batman722 @ May 8, 2005 - 12:24 AM)I in... May 8, 2005 - 12:49 AM
Coomer With the pushbutton starter there's no real re... May 8, 2005 - 2:22 AM
Batman722 thanks Coomer. i was doing some research and I ori... May 8, 2005 - 2:27 AM
Coomer I don't know what you mean.
Say you connect ... May 8, 2005 - 3:06 AM
playr158 all i did was wire my starter wire to the button t... May 8, 2005 - 7:26 AM
WannabeGT4 QUOTE(playr158 @ May 8, 2005 - 7:26 AM)all i ... May 8, 2005 - 7:43 AM
JoKeRkId613 Just swap the tranny and get an Automatic. J/K... May 8, 2005 - 11:31 AM
dustin15brown ^ should never be done May 8, 2005 - 2:08 PM
cyb593 can someone make a how to on this subject cause i ... May 8, 2005 - 10:11 PM
thaimiishoe Push Button Installation
^S2000 Push button tutori... May 8, 2005 - 11:21 PM
Batman722 for the S2K switch a relay is needed from what I h... May 8, 2005 - 11:53 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 7th, 2025 - 5:07 AM |