wiring 3 type r's, help Options

[blkGT]

i am wiring three type r's and i am doing it as pictured.


but my amp is a DEI (directed, viper etc) and where you connect the power, ground, remote, speaker + - it is not your average screw connecter but a seperate peice that the wire is inserted into and is than plugged into the amp.

my question is as follows.

when i run all three positive and negative wires... they will not fit in the given hole. Could i run them (12 ga) and use a butt connector to splice all three into a single (8-12 ga) wire and run that to the amp?

essentially i would be running three wires the +, or - and than turning them into one wire before entering the amp.

_____________
_____________ [splice] amp (+)
_____________


_____________
_____________ [splice] amp (-)
_____________

or would that restrict them, thanks for your time

This post has been edited by blkGT: May 11, 2005 - 9:46 PM

[blkGT]

thanks vin, but im doin it right now.. lets hook up soon tho

i will take pics later guys i have a custom enclosure for my 01 silverado z71. not painted yet but i couldnt wait.

i had 2 type r's in the celli

my amp is a 1200d viper audio. (DEI) same company that makes directed, but a step up from the 1100d.

1200 watts at 1 ohm