7agte build diary, my progress so far Options

[nik]

Feb 25 2005

recieved
intake manifold w/ throttle body (small port)
stock cams gears (small port)
oem FPR
fuel rail (big port)

(( from Bee aka kwanza ))

big port head from a 4agze ebay

Feb 28 2005

i drop the head off at F-Tuning (local shop) to get the head pressure checked if good the head will get fully tuned new valve spring P&P etc.

sent money off to a MR2 member for a
AE101 LEVIN MAP/DLI 4AGZE 1992+ MAP/DLI engine wiring harness

also bought 440 cc 7mgte injectors
4ag AEM adjustable cam gears
talking to frotou about a custom manifold

Need to talk to the shop about what cams to use i'm thinking 256 intake 243 exhaust

March 1 2005

things a need to do
track down DLI coils and distributor
track down a 92+ levin Map ecu ( any help on this one will be a big help)

This post has been edited by nik: Mar 11, 2005 - 12:39 PM

[nik]

I would kind of like to see a write up on how hard it was to get that honda b series mani to line up. That would REALLY open up our options a bit.
[right][snapback]291656[/snapback][/right]

well the b-series manifold has an oval exhaust ports and the 7afe and 4age have round so you just and to go in an inch and half and cut where the piping returns to circle then palce the flange on the motor and line up the openings tack weld a few spots on each pipe pull it off and weld them up then check for leaks.

yea cause i'm 99% goin to use that honda b-series manifold
but with an external wastegate
[right][snapback]291660[/snapback][/right]

My manifold is set up for external waste gate take a closer look
in this first pic the untouched manifold you can see the wastegate mounting point on the right side
BEFORE

AFTER

how much hp r u expecting from all this in the end?
[right][snapback]291664[/snapback][/right]

350 whp or more

This post has been edited by nik: May 25, 2005 - 2:04 PM