![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 19, '05 From Indianapolis Currently Offline Reputation: 0 (0%) ![]() |
can someone give me at least a quick rundown on how to install the keyless part of my alarm. I have power locks that run on priority but im lost on what the hell wires to use, how to diode isolate shiot, and whatever else is needed. But HEY i did somehow get my alarm installed perfectly
![]() -------------------- |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 6, '05 From PA Currently Offline Reputation: 4 (100%) ![]() |
Here is a picture with the lower dash off. You will need to remove this cover if you haven't already done so. It has 4 10mm bolts.
![]() Here is a picture without the cover. Here you can see the blue door control box. The orange harness on the right of the box has all the wires you need for the keyless entry. ![]() As for the relay, it does really depend on the alarm. I cheaped out with I just bought a keyless entry system, but it had built in relays. In a few months I'll probably get an alarm. Please let me know if you need anymore info or pictures, I'll be glad to give you a hand. -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: September 15th, 2025 - 9:54 AM |