![]() |
![]() |
![]() |
|
Enthusiast ![]() Joined Mar 4, '05 From hawaii Currently Offline Reputation: 0 (0%) ![]() |
Hey guys, i know that some of you guys out there have aftermarket audio systems and i was wondering where you guys ran the power cable for the amp...i've pulled up the passenger side carpet by the ecu area (usually a good place to find somewhere) and have been looking for a few minutes and didn't really find any stock grommets through which i could run a power cable...
where have you guys ran your power wire? any help is appreciated. i'd prefer not to drill a hole and install a grommet if i didn't need to. peace |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined May 5, '05 From New-Brunswick Canada Currently Offline Reputation: 3 (100%) ![]() |
The celica was made to have a power wire for an amp enter by the driver fender side (inside the fender). when you remove the step peice you can see a plastic casing with wires running inside of it and on that plastic casing there are clips to hold the power wire. Toyota made this obvious to any installer. You can fit 8g, maybe 4g wire in it, for anything bigger you'll have to cut the clips out.
That's the cleanest way to run a power wire. You won't even see it under the hood -------------------- ----------------------6GC's FIRST V6----------------------
![]() JDM 96 MR2-T Faster - 94 Celica GT 3MZFE Funner - 99 Rav 4 AWD Handy |
![]() ![]() |
Lo-Fi Version | Time is now: July 24th, 2025 - 2:14 PM |