Ok I need some definate info on mounts for swap Options

[Rjb23]

Ok I'm collecting parts for my swap and I need to know what mounts I need to use.
I am using the e153 transmission, 2nd gen 3sgte, the gt shift cables, mr2 inner axles, st185 outer axles.

What motor mounts do I need? Do I still need the axle bracket and bearing?

[sphinx]

i believe its mr2 or gt mounts and you have to cut the transmission mount off the frame and reweld it farther back. that part im sure about.
[right][snapback]301062[/snapback][/right]

So no one has any definate info on this?

I thought at least one person had the e153 in their 3sgte.
[right][snapback]301315[/snapback][/right]

I don't mean to be a d1ck, but people that haven't done this swap should not make a statement and then say " THAT PART I KNOW FOR SURE".

You're wrong.

Dude, if you're gonna do the swap, listen up cause this is what you need.

Passeger side motor mount (insulator) from a 6th gen GT.
Front side motor mount (insulator) and motor mount bracket from a 94-99 GT4
Rear motor mount (insulator) and motor mount bracket from a 94-99 GT4
Driver side motor mount (insulator) and motor mount bracket from a 94-99 GT4

I have a 94 Celica ST with a second gen 3sgte and using a 91 MR2 Tranny (E153).

Here are the part #s for the motor mounts and brackets. You can get them from Champion Toyota and they will special order them for you from Japan. (713)943-7010 Direct Parts Line

12361-74340.......... Insulator.......... $47.10
12371-74440.......... Insulator.......... $88.00
12372-74500.......... Insulator.......... $109.00

12311-74160.......... Bracket, EN.......... $40.00
12321-74310.......... Bracket, EN.......... $26.00
12325-74230.......... Bracket, EN.......... $53.00

There are other people trying different motor mounts and brackets but can't seem to get them to work. Now, i told you what you need in order for it to work. It's your decision.

sphinx. .....