--"Help Wiring my subs?"--, Help needed! Options

[CanadaCelica]

Hi everyone, I know this gets posted allot so I will be straight forward and give you all my information and what I require.

I just purchased today a nice pair of subs, or so I think...lol,
Well this is what I got:

2 10" Infinity 1030w subs 250w RMS and 1000 MAX
1 MTX MXA6001 class D mono amp to power them 300RMS @ 4Ohms, 600RMS @ 2Ohms
There in a sealed box by the way

This is what I would like to know:
1) What gauge wire should I use to hook from the subs to the amp?
2) What gauge wire I should use for the remote turn on?
3) Where is a good place to ground the amp?
4) What would be a good RCA cable to use? Should it have features like twisted or super shielded...lol...I duno just giving examples to help better answer my question.
5) Since the subs are only 250RMS would it be better for me to wire them in 4Ohm, or 2Ohm based on what the amp provides.
6) What style fuse should I use, AGU or ANL? And what AMP rating?
7) Last if anyone can give me some ideas on how I should run my wiring across the celi, through the center console, or side panels? Id be happy

If anyone could help me with these many but hopefully simple to answer questions that would be awesome. I am a newbie at this but I enjoy a challenge.

[Scarrell]

ooooooooooooook.... yeah them kits at Wal Mart will do fine....... anyway..... your subs can be wired at a 2ohm load or 8ohm load... obviously you want a 2ohm load... them subs should take 300rms a piece fine.... but if you want to be extra careful... watch the gains on the amp, and the bass settings on your HU... remember the gains are volume knobs.. theres a thin line between distortion and clean signal...... ummmm here let me find you a wire diagram to show you how to wire the subs if you arent sure...

http://www.rockfordfosgate.com/rftech/wiri...x=14&image.y=17

that should help you... if you got any ?'s let us know!

also post some pics!!!