4agze hg 7afe motor, ..and pistons Options

[playr158]

what exactly doesn't line up or is different about the two pieces?

hks 4ag(z)e
or
greddy

which brand is better?

and when installing it on a 7afe will it completely work?
or sumthing about the water jackets?

need specifics


and on the pistons subject
which brand would people prefer?

arias or wiseco

cause toysport has
arias for 510$ @ 4agze 82mm
or
wiseco for 420$ @ 4agze 82mm

also in order to get the pistons to fit the rods doesn't there need to be some machine work as well?

This post has been edited by playr158: Jun 30, 2005 - 11:46 AM

[FallenHero]

Well, the Greddy gasket is 82.5mm bore, so you get more compression loss from the extra half mm... I hear good things, and will myself be using an HKS unit though.

Pistons, I don't know anything about wiseco pistons, but I believe it was Speedtoe that swears by Arias pistons. Either way, the rod, crank, or rings will go before the pistons I'd think.

Good luck, and sorry for not understanding your question.

Jon

I'd look up the piston pin thing, but I am going to get some food. I'll check in later and see what others have to say.