 Removing Caliber?????????????????????, How do i do it??? |
 Jul 4, 2005 - 3:22 PM
|
 
|
 Enthusiast  Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%)  |
Ok i replaced my brake pads today. What a nightmare, i only got one wheel.. I broke the bolt on the caliber. The one on the bottom to release it and lift it up to get to the pads. Dont know what im gonna do about that. Also i was trieing to remove the caliber to put on new rotors, and i cant get those bolts out of the back.
Any ideas, suggestions, price to get them replaced professionally, all 4? |
 |
Replies
|
Jul 4, 2005 - 3:26 PM
|
|
|
Enthusiast Joined Oct 12, '04 From Montgomery, AL Currently Offline Reputation: 1 (100%) |
you have to get the two bolts that hold the caliper to the caliper frame then there is two bolts that hold the caliper frame to the spindle. the caliper frame has to come off and replace the caliper frame off of a junk yard part. and depending on the bolt where it snaped should not need another caliper.....if you need info on the rotor let me know...and i'll get back to ya
 ~Christina~ |
Posts in this topic
sapperk Removing Caliber????????????????????? Jul 4, 2005 - 3:22 PM
sapperk well you think i could tap out the bolt and replac... Jul 4, 2005 - 3:54 PM celicagurl152003 you can try drilling it out and tap it out to the ... Jul 4, 2005 - 6:57 PM ArizonaRed what do u mean by broke the bolt? did the head com... Jul 4, 2005 - 10:11 PM sapperk I used WD-40 and i banged my wrench with a rubber ... Jul 4, 2005 - 11:58 PM
sapperk Going to the shop tommorrow to have them do it. S... Jul 5, 2005 - 12:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 6:19 PM |