 Removing Caliber?????????????????????, How do i do it??? |
 Jul 4, 2005 - 3:22 PM
|
 
|
 Enthusiast  Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%)  |
Ok i replaced my brake pads today. What a nightmare, i only got one wheel.. I broke the bolt on the caliber. The one on the bottom to release it and lift it up to get to the pads. Dont know what im gonna do about that. Also i was trieing to remove the caliber to put on new rotors, and i cant get those bolts out of the back.
Any ideas, suggestions, price to get them replaced professionally, all 4? |
 |
Replies
|
Jul 4, 2005 - 10:11 PM
|
|
 Enthusiast Joined Sep 17, '03 From Tampa FL Currently Offline Reputation: 1 (100%) |
what do u mean by broke the bolt? did the head come off or did u strip it? you should have tried wd40 and banging it loose. the bolts in the back are a pain in the ass. they are very hard to get loose. i used a mini sledge hammer with my wrench. also you could try a locking wrench if theres a nub to grip.
-------------------- -97 Celica ST
-2001 Celica GTS dk blue mica 100hp per litre (GOT LIFT?) |
Posts in this topic
sapperk Removing Caliber????????????????????? Jul 4, 2005 - 3:22 PM
celicagurl152003 you have to get the two bolts that hold the calipe... Jul 4, 2005 - 3:26 PM sapperk well you think i could tap out the bolt and replac... Jul 4, 2005 - 3:54 PM celicagurl152003 you can try drilling it out and tap it out to the ... Jul 4, 2005 - 6:57 PM sapperk I used WD-40 and i banged my wrench with a rubber ... Jul 4, 2005 - 11:58 PM
sapperk Going to the shop tommorrow to have them do it. S... Jul 5, 2005 - 12:48 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 8:52 AM |