 cant get lip to fit |
 Jul 12, 2005 - 12:33 PM
|
 
|
|
Enthusiast  Joined Mar 1, '04 From Louisville, KY Currently Offline Reputation: 0 (0%)  |
 Doesn't quite get there   And then there's that gap where the lip sticks out a bit at the top. Any ideas on what I should do? I was thinking of cutting the wheel well sides a bit and maybe screw in from the bottom. someone suggested to heat gun the lip and then stretch it. But I dont know... |
 |
Replies
|
Jul 12, 2005 - 7:44 PM
|
|
 Enthusiast Joined Jan 10, '04 From Shoreline, WA Currently Offline Reputation: 4 (100%) |
mine was kinda like that, but it was slide-on-able I tried putting it on like that, witch did not work for me, so I slid it up from the bottum and gave it a good wiggle, it aventualy got there with no problems, I would recomed trying again before any cutting or sanding.
keep in mind that its gana look shorter when its held out from the car, I would get a tape measure and check to distance from the door to the edge (pushed firmly to the car) then measure the kits inside distance to see if it really is shorter. to me it looks close enough to fit. This post has been edited by creis: Jul 12, 2005 - 7:47 PM --------------------  |
Posts in this topic
dahoman9 cant get lip to fit Jul 12, 2005 - 12:33 PM
dustin15brown I would try to stretch it first, or if ur good w/ ... Jul 12, 2005 - 1:02 PM FoREpLayAX i had the same problem. I just put it on and sand... Jul 12, 2005 - 1:44 PM Project95St202 Wow this like a totally missed fitted, You should ... Jul 12, 2005 - 2:07 PM Drocay well u can't send it back, but mine also had ... Jul 12, 2005 - 2:15 PM
gtcelica94 QUOTE(Drocay @ Jul 12, 2005 - 3:15 PM)well u ... Jul 12, 2005 - 2:17 PM dahoman9 QUOTE(FoREpLayAX @ Jul 12, 2005 - 2:44 PM)i h... Jul 12, 2005 - 2:32 PM playr158 aite wat you do
is measure how much its off go to ... Jul 12, 2005 - 3:01 PM Digndoug Ok the best way, get a nice heat gun and heat it u... Jul 12, 2005 - 4:04 PM Drocay if u want perfect wut u need to do is exactly wut ... Jul 13, 2005 - 4:26 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 1st, 2025 - 3:35 PM |