injectors 7afte, will these work? Options

[dans_st]

will these injectors work on my 94 ST 7afte? i know that i need high inpedance, these come with the clips so i figured i could just splice them.
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW

[dans_st]

[quote=nik,Jul 11, 2005 - 3:09 PM]
[quote=dans_st,Jul 11, 2005 - 2:39 PM]Thanks for your help guys, i just bought some RC engineering high impedence 550cc injectors for an integra type-R they should work fine I just need to find the clips to wire them in.
[right][snapback]311263[/snapback][/right]
[/quote]
RC says that the injectors I need are SL9-550's which is the same as an ITR And I don't need a harness or clips


Also I know that this is way too much fuel for a 7AFE my engine also has a turbo so it isn't outrageously too much fuel as it in right now-BUT i can turn it down with an stand-alone EMS and i will be needing more fuel when i get all of my mods done. at which time my engine will be basically a 7AGTE and have more fuel needs.

[nik]

[quote=dans_st,Jul 15, 2005 - 3:09 PM]
[quote=nik,Jul 11, 2005 - 3:09 PM]
[quote=dans_st,Jul 11, 2005 - 2:39 PM]Thanks for your help guys, i just bought some RC engineering high impedence 550cc injectors for an integra type-R they should work fine I just need to find the clips to wire them in.
[right][snapback]311263[/snapback][/right]
[/quote]
RC says that the injectors I need are SL9-550's which is the same as an ITR And I don't need a harness or clips


Also I know that this is way too much fuel for a 7AFE my engine also has a turbo so it isn't outrageously too much fuel as it in right now-BUT i can turn it down with an stand-alone EMS and i will be needing more fuel when i get all of my mods done. at which time my engine will be basically a 7AGTE and have more fuel needs.
[right][snapback]312845[/snapback][/right]
[/quote]

what? ok so you found the injectors you need to fit your clips

ok so...... those injectors are big time over kill on your stock 7afe also big for a 180whp 7afte what is your power goal again? yes you can control your injectors with a standalone ems you might have some idealing problems but a good tune can take care of most of that ("i will be needing more fuel when i get all of my mods done. at which time my engine will be basically a 7AGTE and have more fuel needs.") what all are you doing are you going 7afte or 7agte because there is no basically the same there those are 2 way differnent heads and flow rates so can you clear some of this up