![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
Well not 100% sure if I wanna sell it or not but looking to see what I might be able to get for my turbo project.
I will not part it out so don't ask - Thanks Kit includes: Ceramic ct26 turbo - good condition was rebuilt 10k miles ago by previous owner Custom 3" downpipe Supra limetop injectors with new rings Blitz blowoff valve Tons of mandrel bent piping 2" and 2.25" MSD btm6 (like new condition) MSD 6a - needs toyota adaptor (20-30 $ from MSD) Vortech FMU 6:1 Autometer AF and Boost Guage Neon SRT4 intercooler damaged but still holds boost (perfect fit for celica, would recomend selling off and getting an undamaged one though) Hose clamps 2 bar map sensor 2 or 3 wastegates (stock) Apexi Turbo timer There's more stuff but thats what I can think of off the top of my head right now. Kit will be best offer Thanks NEVER- There are a few pics of the turbo kit in my profile This post has been edited by NEVERSTOP: Jul 18, 2005 - 1:53 AM -------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(mon3y19 @ Jul 19, 2005 - 4:54 PM) if this was complete (with manifolds, dist, fuel pump, etc) i'd take it for 1500 pm me [right][snapback]314341[/snapback][/right] Twin entry manifold is included I have the oil inlet line, with adaptor for stock oil temp sensor, that I made custom with a Air pressure regulator in it (untested but should lessen the amount of Oil pressure getting into the turbo, which when I was on here last seemed to be the main prob with the 5sfte project), otherwise oil lines and coolant lines can be made for 10-15 bucks. As for fuel pump you can pick up a warlbro one off ebay for under $100, but honestly Im not sure if you will really need it. Between the FMU and the injectors you should be fine, I would suggest keeping an eye on the A/F meter and if it runs lean then get the fuel pump, otherwise save your $. All you really would need is the IC couplers (I planed on weldin the pipes), a boost controller which you can get dirt cheap, and the Adapter part from MSD for the 6a (20-30$) otherwise its all there plus some. Thanks NEVER- -------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() ![]() |
Lo-Fi Version | Time is now: July 20th, 2025 - 12:58 PM |