![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 29, '03 Currently Offline Reputation: 0 (0%) ![]() |
Hey guys,
Just finished redoing the taillights with the candy apple red and clear coats as suggested by 1900WattCelica. I did about 4 coats of the red and about 6 or 7 coats of the clear coat. The color is a lot more even and transparent. See results below: ![]() Testors Transparent Candy Apple Red and Clear Cote ![]() ![]() ![]() After about 4 coats of red. ![]() ![]() Masked off black trimming to prep for clear coat. ![]() After about 6 or 7 layers of clear coat. Not that easy... ![]() ![]() Here's the results, I think I'm going to wet sand it, some areas not very even. This post has been edited by Chanh55: Jul 18, 2005 - 10:13 PM |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jun 19, '05 From New York Currently Offline Reputation: 1 (100%) ![]() |
no hes saying u red the tall.. but after u spraythe black tint.. cause other wise it coems out lighter then the rest and without the pattern.. buy sprayin black it makes it as dark as the others so when u red its all even
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 8:13 AM |