Jul 20, 2005 - 11:04 PM
|
|
|
Enthusiast ![]() Joined Jul 16, '03 From Boise, Idaho Currently Offline Reputation: 0 (0%) |
all of a sudden my shock and prox sensors quit working i had spliced them 2gether cuz there was only one spot to hook it up. and today my remote got wet cuz i work at a water park and it stopped (my fault) and so i used the key to open getting redy to get in and reset the alarm and it didnt go off when i opened it. not good not good at all.
-------------------- My car = 0-60 in ~9sec
It's slow, I know |
![]() |
Jul 21, 2005 - 1:36 AM
|
|
|
Enthusiast ![]() Joined Jul 16, '03 From Boise, Idaho Currently Offline Reputation: 0 (0%) |
well if i knew what diode isolated was then the answer would probably be no but the fuse is fine and the remote unlock and lock work and the chirp works and the trunk release works but when the driver door opens when activated nothing happens
-------------------- My car = 0-60 in ~9sec
It's slow, I know |
chicklover345 car alarm Jul 20, 2005 - 11:04 PM
Coomer First thing would be to check the alarm fuse.
You... Jul 21, 2005 - 12:53 AM
Coomer Did the alarm used to go off when you opened the d... Jul 21, 2005 - 3:22 AM
chicklover345 in answer to the door question yes the driver door... Jul 21, 2005 - 1:38 PM
Coomer Well, your alarm manual should tell you which colo... Jul 21, 2005 - 2:26 PM
chicklover345 ok ill try that thank you Jul 21, 2005 - 3:15 PM![]() ![]() |
| Lo-Fi Version | Time is now: February 24th, 2026 - 8:30 PM |