 car alarm, stopped working??? |
 Jul 20, 2005 - 11:04 PM
|
 
|
|
Enthusiast  Joined Jul 16, '03 From Boise, Idaho Currently Offline Reputation: 0 (0%)  |
all of a sudden my shock and prox sensors quit working i had spliced them 2gether cuz there was only one spot to hook it up. and today my remote got wet cuz i work at a water park and it stopped (my fault) and so i used the key to open getting redy to get in and reset the alarm and it didnt go off when i opened it. not good not good at all.
-------------------- My car = 0-60 in ~9sec
It's slow, I know |
 |
Replies
|
Jul 21, 2005 - 1:38 PM
|
|
|
Enthusiast Joined Jul 16, '03 From Boise, Idaho Currently Offline Reputation: 0 (0%) |
in answer to the door question yes the driver door did set the alarm off before and with the diodes i connect the power part of the sensors to them? im not sure which one is the power wire. i think i might have fried the sensors because i connected just the shock sensor to it and it didnt even say it had power to it. both the pass and driver door dont trigger now. and the door indicator and dome light comes on
This post has been edited by chicklover345: Jul 21, 2005 - 2:00 PM -------------------- My car = 0-60 in ~9sec
It's slow, I know |
Posts in this topic
chicklover345 car alarm Jul 20, 2005 - 11:04 PM
Coomer First thing would be to check the alarm fuse.
You... Jul 21, 2005 - 12:53 AM chicklover345 well if i knew what diode isolated was then the an... Jul 21, 2005 - 1:36 AM Coomer Did the alarm used to go off when you opened the d... Jul 21, 2005 - 3:22 AM Coomer Well, your alarm manual should tell you which colo... Jul 21, 2005 - 2:26 PM
chicklover345 ok ill try that thank you Jul 21, 2005 - 3:15 PM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 24th, 2026 - 10:03 PM |