Separated throttle bodies Options

[edo17982]

Hi guys, I'm thinking to go for individual TB.
Actually they're my mods: (7AFE)
- P&P head
- polished valves
- Fuel pressure regulator
- GT4 fuel pump
- H&M filter
- Arospeed header
- custom exhaust
- SAFC2
- in a few days MSD5 with timing control

Now, I spoke with different mechanics and about all of them say that individual throttle bodies is the ideal solution for a NA engine if u tune the A/f ratio properly.Now, with my AFC I can do it, so what do you think about it?

Thanks.

Edo

[west_minist]

QUOTE (FallenHero @ May 5, 2003 - 10:51 PM)

The question is... will 4a intake parts bolt up to a 7a engine?  Also, would it play hell with the ecu?

4A should bolt right onto the &A since it is a 4A head with a long block or long stroke block.

But, verify this. It would take me a couple days for me to verify this with my machine.

But! The 4A is a 1600cc while the &A is a 1800cc. I believe that if toyota had to put on TB, I do not think there would have been the same size TB for the 4A 20v.

The size maybe a black top TB or mayber 50mm TB's

I use to know a TB site. Not sure if I have it on my turbo write up, but chat with them.

There can give you full insite into your application and what you want.

Pic a TB for your needs and performance.

Ok, here it is:
http://www.twminduction.com/ThrottleBody/T...tleBodyFAQ.html
The TWM looks very nice. Very Racing quality. Nicely crafted. This is the one machine is going to use on his turbocharge 4AGE 20v Silver TOP with Forge Pistons

The other is http://www.proflowdesign.com/throttlebodies.html
Do not know much about them. Just search and found them

I personally have seen the TWM and lover them.

Pricing : http://www.twminduction.com/Catalogs/Catalogs-FR.html

This post has been edited by west_minist: May 7, 2003 - 5:28 AM