 big nut for suspension won't open!, help! |
 Jul 23, 2005 - 1:35 PM
|
 
|
|
Enthusiast  Joined Mar 16, '05 From Toronto, Ontario Currently Offline Reputation: 0 (0%)  |
hey, i'm trying to take apart my suspension but the 19mm nut that holds the springs and shocks together won't open. it turns but then the cartridge spins with it. i tried using a vise grip to stop the cartridge from spinning but it still turns. anyone have this problem? and can give me some help removing the nut?
thanks inadvance! --------------------  |
 |
Replies
|
Jul 23, 2005 - 2:27 PM
|
|
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
You need a 19mm socket or wrench on the other side to stop the whole nut and bolt from spinning. And jacking up the hub with the little factory jack just enough to push it up a tiny bit helps too.
-------------------- New Toyota project coming soon...
|
|
Jul 23, 2005 - 3:18 PM
|
|
|
Enthusiast Joined Mar 16, '05 From Toronto, Ontario Currently Offline Reputation: 0 (0%) |
QUOTE(Coomer @ Jul 23, 2005 - 2:27 PM) You need a 19mm socket or wrench on the other side to stop the whole nut and bolt from spinning. And jacking up the hub with the little factory jack just enough to push it up a tiny bit helps too. [right][snapback]315923[/snapback][/right] ohh..you're talking about the hub. i got that out no problem but the other 19mm bolt for the top mount under the hood is not coming out.. -------------------- |
Posts in this topic
J-TYPE big nut for suspension won't open! Jul 23, 2005 - 1:35 PM
macavely ok put the sturt back in ... slide on bolt at the ... Jul 23, 2005 - 3:55 PM
J-TYPE QUOTE(macavely @ Jul 23, 2005 - 3:55 PM)ok pu... Jul 23, 2005 - 10:23 PM mr_dude If you're talking about the rear suspension, I... Jul 23, 2005 - 4:06 PM J-TYPE QUOTE(mr_dude @ Jul 23, 2005 - 4:06 PM)If you... Jul 23, 2005 - 10:26 PM Kwanza26 Doesn't Toyota have an allen key slot cut into... Jul 23, 2005 - 10:25 PM J-TYPE QUOTE(Kwanza26 @ Jul 23, 2005 - 10:25 PM)Does... Jul 23, 2005 - 10:28 PM Rjb23 QUOTE(Kwanza26 @ Jul 24, 2005 - 3:25 AM)Doesn... Jul 23, 2005 - 11:29 PM J-TYPE An impact wrench should loosen it.
There also sho... Jul 23, 2005 - 11:49 PM presure2 when we (dustin and i ) did my bad rear mounts las... Jul 24, 2005 - 7:40 AM J-TYPE QUOTE(presure2 @ Jul 24, 2005 - 7:40 AM)when ... Jul 24, 2005 - 9:11 AM mr_dude Just make sure you don't mess up the silky-smo... Jul 24, 2005 - 2:49 PM J-TYPE QUOTE(mr_dude @ Jul 24, 2005 - 2:49 PM)Just m... Jul 24, 2005 - 10:32 PM Galcobar The strut piston itself, up at the top, has a flat... Jul 25, 2005 - 3:08 AM |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 22nd, 2025 - 9:45 PM |