2.4L 2ZZ-GE, Can you? Options

[JoKeRkId613]

Okay, my brother has a Scion tC. 2.4L 2AZ-FE. Is it possible to put the GE head from a 1.8L 2ZZ-GE Celica GT-S? That way, it would be a 2.4L 2ZZ-GE. I know it's not the same series but I figure the AZ and the ZZ are similar. I'm guessing you can't. Let me know what you guys think. If you can't, then please tell me why. Thanks.

I know this really has nothing to do with a 6GC. But my brother wanted to know. It's a Toyota engine and I mentioned a Celica. Lol. I know you guys know a lot about hybrid engines and things because of the 7A-GE but this one's more complicated. Thanks.

[darksecret]

Alright, the motors are very different and I won't give any technical info being that i've never seen either stripped, consider this and your question will be answered, look at the bolt pattern on the head of both motors, if they are different then I wouldn't even bother trying to fit it, if they are the same then it could be probable yet that would open a lot more questions.
BTW I have grown up around motors, domestic yes, but motors still. I hear questions like can I put a Vortec head on my '88 350? Well yes but you'll need a new intake manifold also and only on '88-'95 blocks, unless you want aftermarket heads.

This post has been edited by darksecret: Jul 24, 2005 - 10:22 PM