muffler, is this an ok one Options

[chicklover345]

I found this, and I know a lot of you don't like ebay, but that is where I like to shop. I was wondering if it will fit right on to the stock piping and if not how can I make it fit? Muffler

[Galcobar]

2.5" inlet on the muffler verus 2" stock exhaust piping. Not going to fit without mods.

Besides which, the thing is a standard issue fart cannon. A 14" long (remember to subtract 3" of piping from either end) body that's 6" around and packed only with steel wool and fibreglass as your only muffler? Unless you're racing, yick. And if you're racing, what's with the stock exhaust?

What really cracks me up is the way it's advertised as if it's specific to the 94-97 Celicas. It's a universal that would have to be welded on. Which is how you'd mount it to your stock piping, BTW. Weld in a reducer (pipe that goes from 2.5" to 2") between your stock pipes and your new muffler.

Personally, I'd spend the same amount of money (including shipping) on a full-size, properly matched MagnaFlow. It'd be quieter and flow just as well, maybe better.

This post has been edited by Galcobar: Jul 25, 2005 - 3:02 AM