![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 27, '04 Currently Offline Reputation: 14 (100%) ![]() |
Hey all... I've noticed that when there is a pretty heavy rain.. the drivers side floor gets soaked... I tried to find how it was getting in the car by pulling up the carpet and spraying the car then seeing where it came in. I couldn't see exactly but it was looked like it was coming from up by the door where the wires go into the car from the door. I think water is coming from the engine bay, down behind the fender, and onto the wires where it follows them into the car...
Anyone have this problem before? any ideas on how to fix it? Thanks :-) -------------------- ~Daniel~ No Longer Celica Owner.. moved on to a 03 WRX-EJ207
![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) ![]() |
QUOTE(Jaws4God @ Jul 31, 2005 - 11:43 PM) how hard is it to take off the fender? anyone have a how to? [right][snapback]318967[/snapback][/right] this is from John's the sidemarker how-to 7. There are 3 top bolts in the engine bay, and 1 bolt near the bottom of the a-pillar inside the door-jam. These bolts are circled in pictures 2 and 3 on the right. Remove these bolts. ![]() ![]() there are the 5-6 holding on the wheel well plastic and 3 holding the fender onto the front bumper (10mm, about 12" extension, and a swivel will get those out) -------------------- |
![]() ![]() |
Lo-Fi Version | Time is now: September 19th, 2025 - 7:00 PM |