Ebay 3sgte 3rd gen with alltrac tranny in a 94st?? Options

[MonsterBOX]

Ok in the past i emailed this guy on ebay about his car...its a 3rd gen engine and all trac tranny in an st...i figured theres no way to use the alltrac tranny so i questioned him about it and he said the he used a steel plate to plate off the rear wheel drive on the tranny only allowing fwd and that all it needed to be driveable was some wiring...is this possible to plate off the tranny it doesnt sound like it to me seems like you would be loosing power

here is the old link
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWA%3AIT

This post has been edited by MonsterBOX: Jul 9, 2005 - 1:13 AM

[celicast3sgte]

u need a complete harness god good luck with that
[right][snapback]311813[/snapback][/right]

well its not the complete harness I guess I just need the ecu harness mod. anyways im looking at getting whats left of a 5th Gen GT for its tranny, clutch pedal, and clutch hydraulics. anyone know if this TRD clutch for the 3sgte will work with the gt tranny? its still off an S series motor.

[celicast3sgte]

ok so update on my car, im purchasing a GT tranny from eazy2001x and im having DG performance do my harness. I have an Apexi turbo timer but i didnt get the harness because i dont know if there is one for my car. (94' ST) anyone know how i should install this? also I have the st radiator and im thinking of just getting hard tubing and a couple 90 degrees and using that for now. now for the fun part... I also need a map sensor or can i get around this without going full standalone just yet? also can anyone get me estimates of the cost for their custom exhaust on their 3s swap? Thanks.