Aug 15, 2005 - 11:35 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
Ok.. well I had an older post, saying that I replaced my front brakes, and sence then I have been having a few problems. A: I broke off a stud so im running on 4 lugs. Which hasnt been at all a problem in the past. B: When im driving above 50ish My stearing wheels is gettign intermitin shaking. I know I already need an alignment, but didnt want to do that if im going to need to replace barings ro somthing.
I checked the tire pressure and im all good. I need to still finish the rear brakes, cause i have not replaced them yet. The tire ware is normal, so im a little bit lost. I didnt get this shake before the brake change, and after i have gone back twice and made sure everything was on tight and right. It feels like my wheel needs to be balanced again like the last time i did, but why would that change from just pulling it off and putting it back on? Any help or comments are welcome Thanks Doug This post has been edited by Digndoug: Aug 15, 2005 - 11:35 AM |
![]() |
Aug 15, 2005 - 8:24 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
i had the same problem and i got it fixed by an alignment
|
Digndoug sterring wheel shake at higher speeds, HELP Aug 15, 2005 - 11:35 AM
LewFX take off the wheels and rotate rotors by hand, see... Aug 15, 2005 - 11:49 AM
jgreening Check for abnormal tire wear. The wear pattern on... Aug 15, 2005 - 11:54 AM
Digndoug QUOTE(LewFX @ Aug 15, 2005 - 11:49 AM)take of... Aug 15, 2005 - 7:29 PM
Batman722 The same thing happen to me in the Jetta !... Aug 15, 2005 - 9:35 PM
Digndoug QUOTE(Batman722 @ Aug 15, 2005 - 9:35 PM)The ... Aug 15, 2005 - 10:27 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 21st, 2025 - 11:03 AM |