Aug 19, 2005 - 12:14 AM
|
|
![]() Enthusiast ![]() ![]() ![]() Joined Sep 17, '03 From Tampa FL Currently Offline Reputation: 1 (100%) |
Check engine light came on. Ok so my car tells me it needs a new EGR valve. Anybody have good pics of it? toyota said 158 for a new one. Can i replace it myself? Does it just need to be cleaned? My car has 137k on it, lotsa buildup. My car still runs smooth. How imparitive is it that i get it replaced? I have emissions this month.
This post has been edited by ArizonaRed: Aug 19, 2005 - 12:31 AM -------------------- -97 Celica ST
-2001 Celica GTS dk blue mica 100hp per litre (GOT LIFT?) |
![]() |
Aug 20, 2005 - 2:53 PM
|
|
|
Enthusiast ![]() Joined Feb 16, '05 From Brantford, Ontario, Canada Currently Offline Reputation: 0 (0%) |
So your check engine light came and and you had someone check it?
The EGR valve is the circular disc that sits to the left of the throttle body attached to the back of the intake manifold. The pipe that connects underneath it runs like an L shape to the back of the motor. If you want to replace it you have to take out most of your intake and disconnect the pipe farther down (its a big nut in the 20 millimeter range). You will need to order the EGR valve, Gasket and the pipe that connects to the egr. You can disconnect the pipe right at the egr but it is easier if you do it farther down. *You dont have to buy the pipe if you dont want but it will save you alot of hassle* I broke a piece off mine trying to take of the pipe in a vice. Hope this helps sorry for no pics. |
ArizonaRed EGR valve help Aug 19, 2005 - 12:14 AM
celicaboston1983 hopefully your light turns off when u change ur eg... Aug 19, 2005 - 1:23 PM
TrdKing You should probably disconnect the battery for a w... Aug 20, 2005 - 2:54 PM
GeEkBoY try pulling the valve and cleaning it. It can dev... Aug 20, 2005 - 10:12 PM
celicaST my advice would to either buy or check out a chilt... Aug 20, 2005 - 10:45 PM
macavely i have had the same problem for about 6 months now... Aug 21, 2005 - 8:24 PM
ArizonaRed Ok i found it in my chiltons manual. I found a vac... Aug 22, 2005 - 12:09 PM
madmods that s great bro, i got the same problem. Can you ... Aug 22, 2005 - 12:25 PM
TrdKing I think there is only two rubber/silicone lines ru... Aug 22, 2005 - 6:32 PM
Chanh55 Weird... I had the same problem. I got it replaced... Aug 22, 2005 - 6:51 PM
purplegt4 i passed emissions with the same problem...just ma... Aug 23, 2005 - 6:07 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 22nd, 2025 - 8:30 AM |