![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 18, '05 From Lincoln, Ar Currently Offline Reputation: 7 (100%) ![]() |
Ok, So today I got my Brembo Rotors that I bought off of ebay and tried to swap it with my other rotors on my Celica. Well these rotors were for the GT and my car is an ST. I can't seem to fit these onton my Celica. Now, do the GT's have different types of breaking system on the front as well such as bigger breaks? I thought they were the same type of breaks with the rear as a difference?
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Mar 2, '04 From Louisiana, USA Currently Offline Reputation: 2 (100%) ![]() |
The ST lines are the same (for the front axle). What I bought from Toyota were the caliper brackets and a set of clips that hold the pads in, as I already had GT calipers and pads. Didn't need any extra hardware. One final thing I should mention; you will not beable to use the ST dust covers with the GT setup - they are too small. Not a big deal to me, but maybe something you could find at a junkyard.
|
![]() ![]() |
Lo-Fi Version | Time is now: August 1st, 2025 - 5:22 PM |