![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) ![]() |
DCW (Doggy aka Romas) has agreed to make these skirts for us in a group buy. See my post on page 2 for details Here are a couple pics:
![]() ![]() And here is a thread about it: Explanation Thread Post up if you are SERIOUSLY interested. This post has been edited by doGGy: Jul 11, 2006 - 12:38 AM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) ![]() |
Good News TRD Skirt Lovers!
Shipping prices from the UK company were unreasonable. Also, the skirts are expensive by themselves. As a result, I contacted our own Doggy a.k.a. Romas of DCW and he has agreed to make these in a group buy IF there is enough interest. Of course, you can expect the quality and fitment that buying from Doggy always means. The preliminary prices are as follows: 5 buyers: $435 per set shipped to your door. 8 buyers: $405 per set shipped to your door. We will need a deposit of $100 to confirm your interest. The group buy is only guaranteed to be open until we have 5 buyers. If there is continued interest, we may hold it open for a short while longer to get the price down a bit. These prices are subject to change based on how much the originals need to be reworked and how much material will be required. Realistically, a set could cost $35 more or less depending on circumstances. If you are not in the U.S. your price might be more (or less if you are near Romas) We will need five members for this to work out. Manny, DEF and I are in. That means we need at least two more. 1. jgreening 2. presure2 3. defgeph This post has been edited by jgreening: Aug 25, 2005 - 5:37 PM -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
![]() ![]() |
Lo-Fi Version | Time is now: June 4th, 2025 - 12:21 AM |