FS: unfinish project 3sgte Options

[TOYOCE409]

Well I haven't had time to work on my 95 st with a 3sgte motor for a about 6 months so I am thinking about selling it. It got JDM front with 3sgte engine in but I'm having a hard time finding the right axle and the engine was running but when I changed tranny I must of not wired something right. I want to see if I can get at least 3500 for the whole car or if I should part it out. I got pics in my profile.

[DG_Performance]

i know you are selling it ....cause you got an mr2 right? i saw the corner of one sitting in one of your pics!!

rjb23,
if you car started b4 perfectly fine and now wont start it does not seem like a wiring problem to me? unless you pulled on the wires taking the harness back off the motor and pulled something apart.....
i have done about 8 harnesses and have only had 2 wires wrong out of all the harnesses i have done so i am pretty sure it is wired up fine!
p.s.
i thought you were supposed to call me????
if you email me or pm me or call me i could pin point where you problem is comming from with a few simple tests that you can do on the spot there. i am still wondering why it was perfect then you took the harness out?

This post has been edited by DG_Performance: Sep 7, 2005 - 9:01 AM