CAR WON'T TURN OFF, EMERGENCY, PLEASE HELP... Options

[JoKeRkId613]

As many know by my annoying posts, I've been installing the ST205 cluster on my AT200. Two members have been contributing greatly to this project with their knowledge and even provided me somewhat of a guide. I went over it many times and everything works. Every light works. My temperature needle is insane, but w.e. I'm not worried about that one right now as I pretty much just got a new cooling system, radiator & company. My gas gauge also is on empty which is not accurate. But my main issue now is the car itself. It won't turn off...

The cluster has 3 plugs in the back. The blue plug(the one to the right) is the one with the problem. I know this because when I turn off the car and pull the keys out, the engine stays on. All else turns off properly(cdplayer, windows, etc.). And as soon as I pull the blue plug out, the engine turns off. I mean, that's okay except then I would have to pull my cluster out and yank the blue plug out everytime I turn off the car. Lol. Not too convinient. I noticed the two people that were helping me have manual cars... Mine is auto. I'm not sure if that has anything to do with it but I'm very worried.

If anyone knows what this could be, I would really appreciate some help. Thanks.

[JoKeRkId613]

The wiring schematic would be kinda hard for me to do myself. I tried looking on celicatech to see if they had any but no luck. I first tried to go by what nik sent me which was just showing me what wires from the at200 go to what on the st205. everything works perfectly except for those things so im on the right track. the thing is that theres a red wire with a blue stripe which is what controls the fan that turns on when the engine heats up. then there's another wire that turns the car off and on... now theres a yellow wire that just jumps right into where the on/offengine wire is. it seems that yellow wire turns the engine on and off. or the fans on and off. and for some reason it cant do them both simultaneously. so either the fans go off when i pull out the key and the engine stays on, or the engine goes off and the fan stays on. depending on which one i tie the yellow wire to. the engine or the fan. so im just going to leave it the way it is and install a switch where the yellow wire is to shut the engine off when the key is pulled out. it's going to be a pain to get the st205/at200 schematics. i dont even know where to look.