Very upset, dyno results Options

[StreetRacing10PS...]

ok, so i took my 7afTe to get dynoed today and was VERY unhappy with the results. at 8PSI it pulled a 93.5HP and 97.7Ft-lbs torque. thats less then stock!!! i have no clue what is wrong with my car. its def getting boost too because from 3-5 k u can feel it pull and then letting off the gas the BOV goes off. so i Have no clue what is wrong. if u have any idea whats goin on let me know. right now iam goin out to look at SRT-4s cuz i want a second car, this car just aint doin it for me.

[nik]

get one of these manual boost controllers.If you have checked all the connections and everything is tight and the hole is caped off its got to be the wastegate so get on ebay or borrow one from a friend.And keep me up dated


[right][snapback]336595[/snapback][/right]

as i said earlier

found out the problem was my wastegate. i put a clamp on the vacume line to the waste gate and now am boosting at a whoppin 3PSI!! lol all i need i think is a manual boost controller and ill b set.
[right][snapback]337844[/snapback][/right]

yep

now the only problem is the intercooler piping. the clamps keep comming loose from the boost and the rubber piece that connects the turbo to the 1st part of the intercooler piping keeps coming off and its a pain in the A$$ to get to.
[right][snapback]338053[/snapback][/right]

the one right below the turbo is a pain to get but once you do clamp it tight on one of the 14 psi runs i blew the bottom pipe apart i just got in there clamped it down real tight and never had a problem again atleast you finally got some boost though now like i've told you a few hundred times already recheck all connection and make sure there tight and have fun boosting and get her redynoed

This post has been edited by nik: Sep 26, 2005 - 3:14 PM