Power Steering Pump Options

[Rjb23]

Did anyone else have to remove their power steering pump to get their 3s to fit right?

I had to remove mine because the pulley was hitting on my frame, I'm using the e153 tranny, the mr2 driverside, the GT front, and passenger and I plan on using the st205 rear.

[ems3s]

Ok, the mr2 bracket will not fit with the 205 insulator on the rear. I tried this. Nor 205 bracket with mr2 insulator. You definitely need both 205 rear bracket and insulator. Period. Please save yourself the money and time get the rear 205 parts now!

I gave up on trying 185 parts as I wasted about $400AUS on crossmember, brackets and mounts that did not work at all.

The gt/st insulator has different bolt locations to the mr2 bracket, you may find that one or twobolts will work but not all three.
What would be worth a try would be left gt tranny bracket with 205 insulator. I have a feeling it would be close. (that 205 bracket is no longer avialable from toyota)

Unfortunately i don't have pics of the rear bracket on my car atm but take my word it is exactly what you need.

I'll take some pics this weekend when I jack up the car to install a new left inner shaft stub.