Sep 27, 2005 - 9:52 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 25, '03 From Miami, FL Currently Offline Reputation: 9 (100%) |
I was just wondering how the fuel gauge works on the clusterr. See I have an st205 cluster now and the fuel wont display. it tells me when im about to run out by lighting up the orange fuel light. but thats about it. the needle stays on empty. anyway to reset this or something? thanks.
-------------------- ![]() |
![]() |
Sep 29, 2005 - 2:50 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%) |
For the sake of simplicity, from here on out, both AT200 and ST205 connectors will use this scheme (as per USDM BGB):
A = 13 pin B = 16 pin C = 10 pin Wires in the column labeled ST204/AT200 will need to be connected to the plug in the column labeled ST205. Australia ST204 AT200---ST205 A01---to---A02 A02---to---A01 A03---to---?NO SRS LIGHT? A04---to---?NO SRS LIGHT? A05---to---?NO SEATBELT LIGHT? A06---to---B03 A07---to---B05 A08---to---A04 A09---to---B06 A10---to---A09 A11---to---N/A A12---to---N/A A13---to---?PARK, NEUTRAL, CLUTCH SWITCH? B01---to---B01 B02---to---N/A B03---to---B02 B04---to---A12 B05---to---N/A B06---to---B07 B07---to---B08 B08---to---B09 B09---to---B10 B10---to---B11 B11---to---B12 B12---to---N/A B13---to---B14 B14---to---C01 B15---to---B15 B16---to---B16 C01---to---N/A C02---to---C03 C03---to---N/A C04---to---C02 C05---to---N/A C06---to---C06 C07---to---C07 C08---to---C08 C09---to---C09 C10---to---C10 Europe ST204 AT200---ST205 A01---to---A02 A02---to---A01 A03---to---?NO SRS LIGHT? A04---to---?NO SRS LIGHT? A05---to---?NO SEATBELT LIGHT? A06---to---B03 A07---to---B05 A08---to---A04 A09---to---B06 A10---to---A09 A11---to---N/A A12---to---N/A A13---to---?PARK, NEUTRAL, CLUTCH SWITCH? B01---to---B01 B02---to---N/A B03---to---B02 B04---to---A12 B05---to---N/A B06---to---B07 B07---to---B08 B08---to---B09 B09---to---B10 B10---to---B11 B11---to---B12 B12---to---N/A B13---to---B14 B14---to---C02 B15---to---B15 B16---to---B16 C01---to---N/A C02---to---C03 C03---to---N/A C04---to---C05 C05---to---N/A C06---to---C07 C07---to---C08 C08---to---?NO O/D OFF LIGHT? C09---to---?NO CRUISE CONTROL LIGHT? C10---to---C10 Does the ST205 combo meter not have a warning light for the seatbelt or airbags? Aparently the European ST205 doesn't have seatbelt, airbag, O/D off, or cruise control lights. EDIT: 10/22/2005 Before i give the pin information I'm going to make sure a few things are known: 1. You will not have a cruise control indicator. 2. You will not have an overdrive off indicator. 3. Wire A13 from the AT200 will not plug into anything which simply means your brake light won't come on when you're starting the car. 4. Rear foglights indicator will not be used for obvious reasons. 5. I have no idea what the indicator is below the rear foglight indicator and therefore will not be used. 6. There are diodes in the rear foglight and mystery indicator circuits. You don't need to worry about them. No need to put bulbs in their sockets either. 7. B13 on the ST205 combo meter will be directly connected to the MAP sensor from an ST205. Japan ST204 AT200---ST205 A01---to---A01 A02---to---B02 A03---to---C05 A04---to---C04 A05---to---C07 A06---to---A04 A07---to---A12 A08---to---A08 A09---to---B04 A10---to---A06 A11---to---NOTHING A12---to---NOTHING A13---to---N/A (BRAKE LIGHT ON WHILE STARTING) B01---to---B01 B02---to---NOTHING B03---to---B03 B04---to---A13 B05---to---NOTHING B06---to---B06 B07---to---B07 B08---to---B08 B09---to---B09 B10---to---B10 B11---to---B11 B12---to---NOTHING B13---to---B14 B14---to---C01 B15---to---B15 B16---to---B16 C01---to---NOTHING C02---to---C02 C03---to---NOTHING C04---to---C03 C05---to---NOTHING C06---to---C08 C07---to---C06 C08---to---N/A (OVERDRIVE) C09---to---N/A (CRUISE) C10---to---C10 This post has been edited by WannabeGT4: Oct 23, 2005 - 9:06 AM -------------------- ![]() Project ST204.5 99.88946% complete... |
JoKeRkId613 Fuel Gauge Sep 27, 2005 - 9:52 AM
95CelicaST maybe with all these problems you're having wi... Sep 27, 2005 - 10:42 AM
WannabeGT4 AT200 and ST205 fuel level sending units function ... Sep 27, 2005 - 2:58 PM
JoKeRkId613 Wannabe. Thanks for all that info. However, I... Sep 27, 2005 - 3:20 PM
WannabeGT4 Combonation Meter is what is commonly refered to a... Sep 27, 2005 - 3:36 PM
WannabeGT4 European ST205 Combo Meter:
Australian ST205 Comb... Sep 27, 2005 - 3:42 PM
JoKeRkId613 Yes Wannabe, I do have the original plugs and abou... Sep 27, 2005 - 5:14 PM
JoKeRkId613 bump Sep 28, 2005 - 3:29 PM
WannabeGT4 Sorry, no time to work on it lately. I'll try ... Sep 28, 2005 - 4:32 PM
JoKeRkId613 Hey bro, take your time. I'm glad to hear I pr... Sep 28, 2005 - 5:23 PM
JoKeRkId613 Thanks a lot Wannabe. I'll compare those to mi... Sep 29, 2005 - 4:43 PM
SoundSlut_dotcom i say fill it up at the station, take the needle o... Sep 29, 2005 - 5:08 PM
JoKeRkId613 ^Will that really work???
EDIT: Nah, Charles, it ... Sep 29, 2005 - 5:44 PM
soulshadow All these wiring for the fuel gague. I would shoot... Sep 29, 2005 - 11:06 PM
WannabeGT4 Nope, not sure if they are the same. I'm just ... Sep 30, 2005 - 7:27 AM
JoKeRkId613 ^gee, thanks. lol. just kidding. my dad was cracki... Sep 30, 2005 - 1:37 PM
WannabeGT4 QUOTE(JoKeRkId613 @ Sep 30, 2005 - 1:37 PM)^g... Sep 30, 2005 - 2:26 PM
JoKeRkId613 Wannabe, there is no way that we're on the sam... Oct 7, 2005 - 6:13 PM
JoKeRkId613 If I use a multimeter, or one of those volt measur... Oct 8, 2005 - 7:09 AM![]() ![]() |
| Lo-Fi Version | Time is now: November 23rd, 2025 - 4:59 PM |