Fuel Gauge, How's it work? Options

[JoKeRkId613]

I was just wondering how the fuel gauge works on the clusterr. See I have an st205 cluster now and the fuel wont display. it tells me when im about to run out by lighting up the orange fuel light. but thats about it. the needle stays on empty. anyway to reset this or something? thanks.

[JoKeRkId613]

^Will that really work???
EDIT: Nah, Charles, it still won't work. "Full" will just become the "dead point" for the fuel gauge because according to Wannabe's connections, my fuel gauge and temp gauge aren't even hooked up. Lol. Which makes sense. Thanks for the suggestion tho.

Anyway. I converted what I had done with the wiring to what Wannabe gave me. So this is what he did:
AT200---ST205
A01---to---A02
A02---to---A01
A03---to---?NO SRS LIGHT?
A04---to---?NO SRS LIGHT?
A05---to---?NO SEATBELT LIGHT?
A06---to---B03
A07---to---B05
A08---to---A04
A09---to---B06
A10---to---A09
A11---to---N/A
A12---to---N/A
A13---to---?PARK, NEUTRAL, CLUTCH SWITCH?

B01---to---B01
B02---to---N/A
B03---to---B02
B04---to---A12
B05---to---N/A
B06---to---B07
B07---to---B08
B08---to---B09
B09---to---B10
B10---to---B11
B11---to---B12
B12---to---N/A
B13---to---B14
B14---to---C01
B15---to---B15
B16---to---B16

C01---to---N/A
C02---to---C03
C03---to---N/A
C04---to---C02
C05---to---N/A
C06---to---C06
C07---to---C07
C08---to---C08
C09---to---C09
C10---to---C10

And this is what I did:
AT200---ST205
A01---to---N/A
A02---to---N/A
A03---to---N/A
A04---to---A08
A05---to---N/A
A06---to---A06
A07---to---A02
A08---to---A10
A09---to---C04
A10---to---N/A
A11---to---A11
A12---to---N/A
A13---to---A13

B01---to---B01
B02---to---B02
B03---to---C09
B04---to---B03
B05---to---N/A
B06---to---B06
B07---to---B07
B08---to---B08
B09---to---B09
B10---to---B10
B11---to---B11
B12---to---N/A
B13---to---A01
B14---to---B14
B15---to---N/A
B16---to---B16

C01---to---N/A
C02---to---N/A
C03---to---N/A
C04---to---C05
C05---to---C03
C06---to---N/A
C07---to---C07
C08---to---N/A
C09---to---C08
C10---to---N/A

I italicized the similar wire connections so I know what I have to change. Are you sure this is correct tho because I'm pretty sure all my lights work at the present time. The only thing not functioning that I know of is the fuel gauge, temperature gauge, the 3 green bulbs won't light up the ComboMeter when I turn on my headlights, and the cooling fan stays on after I pull the key out of the ignition. But I can turn it off by pulling the wiper stick down all the way and pushing it back up when the car's off. Are you sure the Australian version is the same as the Japanese version? Because if it is then I'll go by what you said. Thanks again.

This post has been edited by JoKeRkId613: Sep 29, 2005 - 9:08 PM