Gauge colour change, For an automatic Options

[soven]

Bought the bulbs planning to change the colour of my gauge only to find that there are only two sockets for the bulb...

The fuel level, water temp part of the gauge is completely different and uses 3 small bulbs instead of the same bulb that is used in the middle and upper right. Has anyone done it on an automatic before?

There are 3 bulbs in place and 2 of them seem to have a 4mm base while the other one is 5mm

pic of bulbs: http://img384.imageshack.us/img384/3497/picture0304mj.jpg

This post has been edited by soven: Sep 16, 2005 - 9:09 PM

[soven]

For people that actually read threads I make.

I have gone ahead and ordered #74LEDs . the small ones are indeed 74s and the slightly bigger one isnt an issue, just need to make the 74 fit in it and not fall out.

I got these:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewI...me=STRK:MEWN:IT

to compliment the 5 led bulbs (item number: 8004207233 )

Quite dissappointed with the brightness of the #74 and it looks like I would have to find an alternative. Will post a pic of the speedometer later.

pic: http://img389.imageshack.us/img389/1185/picture0431vm.jpg

This post has been edited by soven: Oct 2, 2005 - 4:55 AM