Fuel Gauge, How's it work? Options

[JoKeRkId613]

I was just wondering how the fuel gauge works on the clusterr. See I have an st205 cluster now and the fuel wont display. it tells me when im about to run out by lighting up the orange fuel light. but thats about it. the needle stays on empty. anyway to reset this or something? thanks.

[JoKeRkId613]

Wannabe, there is no way that we're on the same page... I tried everything you gave me and nothing worked at all. No needles, no lights. I wrote down some of the wires you connected to something else that didn't even exist...
Europe
AT200---ST205
A01---to---A02
A02---to---A01
A03---to---?NO SRS LIGHT?
A04---to---?NO SRS LIGHT?
A05---to---?NO SEATBELT LIGHT?
A06---to---B03
A07---to---B05
A08---to---A04
A09---to---B06
A10---to---A09
A11---to---N/A
A12---to---N/A
A13---to---?PARK, NEUTRAL, CLUTCH SWITCH?

B01---to---B01
B02---to---N/A
B03---to---B02
B04---to---A12
B05---to---N/A
B06---to---B07
B07---to---B08
B08---to---B09
B09---to---B10
B10---to---B11
B11---to---B12
B12---to---N/A
B13---to---B14
B14---to---C02
B15---to---B15
B16---to---B16

C01---to---N/A
C02---to---C03
C03---to---N/A
C04---to---C05
C05---to---N/A
C06---to---C07
C07---to---C08
C08---to---?NO O/D OFF LIGHT?
C09---to---?NO CRUISE CONTROL LIGHT?
C10---to---C10

I have a 1994 A/T AT200. This is a 6th Gen ST205 European(It has rear fog light, no cruise light, no o/d off light...yes, it has srs and seatbelt lights tho so i dont know why the diagrams didnt) cluster I'm putting in. None of these colors even match up. I know maybe they're not supposed to but in the connections by purplegt4, at least most of the cluster worked and most of the wires matched up in color. Were all ST205's OBDII? Are you sure this is supposed to work? I doublechecked everything, not one color wire matched up but nothing worked. I did it exactly like you said. I bolded the wires that didn't exist on the plugs of the AT200 and the ST205. I dont see how you have them connected to something else. Thank, I appreciate what you're doing for me but please help me out and stick with me or else I'm stuck. Thanks in advance. What AT200 diagram are you using to be exact?